SANDARAN Engineering

Capabilities

Four divisions, one company. The drawing, the steel, and the installation are under the same management.

01 ·

Structural & Civil

  • Steel fabrication,
  • industrial buildings,
  • plant foundations,
  • jetty superstructure,
  • pipe racks,
  • tank farms,
  • workshop and stores buildings.

Own fabrication yard means the drawing and the steel are under the same roof.

Related projects
Steel portal frame — elevation Elevation of a steel portal frame, showing two columns, pitched rafters, base plates and connection nodes at the eaves and apex.
Steel portal frame — elevation

02 ·

Marine & Coastal

  • Jetties,
  • berth structures,
  • mooring dolphins,
  • fender systems,
  • shoreline protection and revetment,
  • offshore support base works,
  • load-out facilities.

Tidal windows in Sabah are narrow. Work is planned around them, not against them.

Related projects
Jetty cross-section — splash zone Jetty cross-section showing two piles, a pile cap and deck slab. Two dashed waterlines bracket the splash zone, with dimension arrows at the right and a hatched seabed below.
Jetty cross-section — splash zone

03 ·

Process & Mechanical

  • Palm oil mill plant,
  • sterilizer stations,
  • water and effluent treatment systems,
  • piping and pipework,
  • pressure vessels,
  • boiler house works,
  • mechanical installation and alignment.

Shutdowns are costed in days of lost production. Scheduling is the engineering.

Related projects
Piping isometric — flanges, valve and insulation Isometric pipe run with a vertical offset, two flanged joints and a handwheel valve. Dashed lines indicate insulation around part of the pipe.
Piping isometric — flanges, valve and insulation

04 ·

Asset Integrity

  • Condition surveys,
  • NDT and inspection programmes,
  • corrosion management,
  • cathodic protection,
  • remaining-life assessment,
  • maintenance planning and scheduling.

The division that stops the other three from being needed twice.

Related projects
Corrosion depth profile — section loss Section through a corroded plate. A dashed line marks the original surface, an irregular profile shows material loss, and a dimension arrow indicates the corrosion depth.
Corrosion depth profile — section loss

05 —

How we work

  1. Assessment

    Site survey, measurement, condition data. We establish what is actually there before proposing anything.

    Request an assessment

  2. Design

    Drawings, calculations, and approvals. Reviewed with you before fabrication begins.

  3. Fabrication

    Yard work with defined inspection hold points. You are welcome at any of them.

  4. Installation

    Site work sequenced around your operations, not ours.

  5. Commissioning & handover

    Testing, as-built drawings, and operation and maintenance manuals.

06 —

The Sandakan yard

Site area
2.4 ha
Covered fabrication bay
1,800 m²
Overhead crane
20 t
Open laydown
8,000 m²
Annual steel throughput
2,400 t
Surface treatment
Blasting and painting bay
Water frontage
Direct load-out to barge
Yard enquiries